JBL

S3-1024

Details
Artikel# S3-1024
Variations
  • Select Color
    • Black
Product Actions
Add to cart options
€ 179,00179.0 per stuk

Op voorraad. Verwachte levertijd is 1-2 werkdagen

Algemene specificaties

Sensitivity 91 dB
Frequency Response 30 Hz - 175 Hz

Audio Specifications

Power Handling (Peak) 1350 W
Sensitivity 91 dB
Power Handling (RMS) 450 W
Frequency Response 30 Hz - 175 Hz

Woofer Specifications

Voice Coil 63 mm
  • 1 subwoofer
  • Owner’s manual
JBL believes sound quality should never be compromised. And Series III subwoofers make sure you don’t have to compromise flexibility, either. That’s because the high-performance, step-up subwoofers feature SSI™ (Selectable Smart Impedance), an exclusive impedance switch that lets you select the optimum impedance—2 or 4 ohms—for your system. Special aero-cooling design in the voice coil boosts power handling as well as reliability. And an oversized voice coil handles more power than common two-inch voice coils. More power, more reliability, more flexibility—and no compromising. When you’re ready to step up, Series III is your subwoofer.

Handleidingen en Downloads

De laatste gebruikershandleidingen, beknopte handleidingen en documenten.

Search Result For ""

S3-1024 heeft als beoordeling 4.8 van de 5 door 4.
Rated 5 van de 5 door uit great sound , power handling I now have two in my car, with a third in my floor ( will be adding it shortly) .At first I was scepticle about the handling the power I have( rf bd 1500 ) so I ran them at 2 ohms planning to later flip the switches after break in but now I bought another and I'll leave the swtches right where they are and add a third .my amp will be at around 1.3ohms so it will be feeding them around 5 to 600 watts .after this I my even go with 4, love these subs . Always loved jbl amps and subs. This is a lot of sub for the money. You won't regret it.
Datum plaatsing: 2017-03-10
Rated 5 van de 5 door uit Awesome sound I bought 2 JBL GTO S3 1024 10" subs, and powering them w/ JBL GTO EZ1001 amp, and they sound great! Very clean! A very sweet combo.
Datum plaatsing: 2016-02-10
Rated 5 van de 5 door uit Made this happy home for it. Also got amp to run. Great pair.
Datum plaatsing: 2018-11-06
Rated 4 van de 5 door uit Wow Excellent sound quality at high and low volume levels
Datum plaatsing: 2018-05-11
  • y_2019, m_3, d_21, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_nl_BE, sid_s3-1024_, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_harmanaudio

packaging and websites say 3 inch coil owners in reviews are saying its a typo and its a 2.5 coil can someone please confirm the coil size?

Gevraagd door: audiophile88901
Hi! The S3-1024 has a 2.5" Voice Coil Diameter.
Beantwoord door: Nick F
Datum plaatsing: 2018-05-01

My Rockford Fosgate R500XD1 is going into protect mode when the S3-1024 is installed with the 2 Ohm setting. When I switch to a 4 Ohm Kicker it works fine and does not go into protect mode. Thoughts? The amp is capable of 2 Ohms according to specs.

Gevraagd door: Hou1
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Beantwoord door: Steven M
Datum plaatsing: 2018-07-01

I want to run a pair of these in a ported box. If i follow your guide at 1.5cu ft gross each sub, and your chioce of port (what is your port dimensions) what hz would my box be tuned to?  Thanks! 

Gevraagd door: Gizz
Hi. The port dimensions are shown in the owner's manual: 287 mm long, 76 mm in inner diameter. Tuning frequency is 30 Hz.
Beantwoord door: Bo Harman
Datum plaatsing: 2018-07-01

I just ordered one of these from sonic, and i plan to buy a second im going to be using a audiopipe 15001d to power em at two ohms the rms out of the amp will be under 1000 watts this should be ok right as long as i dont turn the amp gain to high

Gevraagd door: Shadodies
Just don't under power the units. I stand correct, but the A class, and A/B class amplifiers would start clipping at their maximum output. That would effectively push DC through the speaker Voice coil and fuse it. I haven't don't the research on the D class amplifiers and I don't know what their response to this situation would be in. In pro audio we use Digitial Signal Processoring rack units. Smart first came out with these in the 90's and the intelligent management of the 2 X 15" and and the 1" horn loaded HR driver took at the the horn loaded systems for medium venues for a couple of years. The DSP was tuned to the speakers but now you get good quality DSP units that can can handle multiple speakers/amps system. Thinking of buy of buy a phased array system and getting into audio engineering again. But the HK are so expensive that they must be have some IP setting them apart. Any ideas?
Beantwoord door: Bass Head
Datum plaatsing: 2017-12-02

I'm confused by the box dimensions referenced in the manual. It says vented box volume (includes driver + port displacements) should equal 1.5 cubic feet. Is that the gross volume or the net volume? Thanks.

Gevraagd door: Adam201091
It is the gross volume. Please build the box to exactly 1.5 cubic feet and then install the speaker and the port and you will be good to go.
Beantwoord door: Joe G at Customer Service
Datum plaatsing: 2018-07-01

Is the GTR-601 amp a perfect or close to perfect match to push 2 S3-1024 subs at 2 ohms?

Gevraagd door: Marc25
If using a single S3-1024 we will advised that you will run this on 4 Ohms, at this rate there will be no risk on speaker and the amp. If you want to run two subs (parallel) from a single GTR-601 at 2 ohms, it will work. Be advised, when doing this you need to keep the amp at moderate to low volume and well-ventilated.
Beantwoord door: Bryan at Customer Service
Datum plaatsing: 2019-02-26

How many watts is this sub?  And what's the best watts for the amp to be for this sub

Gevraagd door: Shawn17cruz
As shown under the specs above, it can handle 450 watts of RMS power handling. That said, you can go with any amp with an RMS wattage rating of 450 watts or lower. For example, if your listening taste only requires a 200 watt amp, this would work fine as the sub can handle UP TO 450 watts. On the other hand, if you are looking to get the sub as loud as you can get it, go with an amp that has a rating of 450 RMS watts. But do not go with anything more powerful.
Beantwoord door: Joe G at Customer Service
Datum plaatsing: 2018-07-01
  • y_2019, m_3, d_21, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_nl_BE, sid_s3-1024_, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio
Delen